Configuring Friendly Port Names - HP ProCurve Series 4100GL Management And Configuration Manual

Interface Access, System Information, and Friendly Port Names
Using Friendly (Optional) Port Names
7-16
To retain friendly port names across reboots, you must save the current
■
running-configuration to the startup-config file after entering the friendly
port names. (In the CLI, use the write memory command.)

Configuring Friendly Port Names

Syntax: interface [e] <port-list> name <port-name-string>
Assigns a port name to port-list.
no interface [e] <port-list> name
Deletes the port name from port-list.
Configuring a Single Port Name. Suppose that you have connected port
A3 on the switch to Bill Smith's workstation, and want to assign Bill's name
and workstation IP address (10.25.101.73) as a port name for port A3:
Figure 7-9. Example of Configuring a Friendly Port Name