HP ProCurve Series 4100GL Management And Configuration Manual page 354

802.1w Rapid Spanning Tree Protocol (RSTP) and 802.1d Spanning Tree Protocol (STP)
802.1D Spanning-Tree Protocol (STP)
The asterisk indicates
that you must reboot the
switch to implement the
configuration change
from RSTP to STP.
Figure 14-15. Changing from RSTP to STP Requires a System Reboot
14-32
3. If the Protocol Version is set to RSTP (as shown in figure 14-14), do the
following:
) to move the cursor to the Protocol Version field.
a. Press [E] ( Edit
b. Press the Space bar once to change the Protocol Version field to STP.
c. Press to return to the command line.
[Enter]
d. Press (for
[S] Save
Operation screen. you will then see a screen with the following:
e. Press [0] (zero) to return to the Main Menu, then
switch.
f. After you reboot the switch, enter the menu command at the CLI to
return to the Main Menu, then select:
2. Switch Configuration . . .
4. Spanning Tree Operation
You will then see the Spanning Tree screen with STP (802.1D) selected
in the Protocol Version field (figure 14-16).
) to save the change and exit from the Spanning Tree
[6] to reboot the