General Information; Description Of Specifications; Accessories - DeDietrich C230 ECO-A 120 Installation, Operating And Service Manual

C230 Eco-A
15 Ge neral information

15.1 Description of specifications

15.2 Accessories

High efficiency gas boiler
 Modulating (20 - 100%) or 0-10V or 0-20 mA or on/off control is
optional.
 Suitable for use with natural gas and propane.
 Average boiler housing noise level at 1 m distance around boiler 
59 dBA
 Heat exchanger made of cast aluminium sections.
 Cylindrical, stainless steel, premix burner with metal fibre cover.
 Air supply fan.
 Flue gas pressure difference switch.
 Temperature control: adjustable between 68 – 194°F (20 - 90°C).
 Low water level protection using temperature sensors.
 Gas/air mixing system (venture).
 Gas multiblock (120 V)
 Electronic control and protection equipment: 120 V.
 Fan; 120V
 Pump switch: on/off 120 V max. 300 VA.
 Frost protection.
 Filling and drain cock.
 Trap.
 Suitable for both room ventilated and room sealed versions.
 Sheet steel casing, off the ground.
 Plastic condensate collector.
 Boiler equipped with closed air box.
 Boiler fully pre-wired with built-on control box.
 Installation option for boiler controllers.
 Suitable for OpenTherm controllers.
 Supplied with internal heating curve.
 Well laid-out instrument panel with LCD display.
 Menu-controlled microprocessor boiler control with operating and
servicing diagnostics.
Available in 4 models:

C230 ECO-A 80

C230 ECO-A 120

C230 ECO-A 160

C230 ECO-A 200:
 Air supply filter
 Cleaning knife
 0 - 10 V control PCB (IF-01).
 0 - 20 mA control PCB.
 Expanded control/protection PCB (SCU-S01).
 Outside temperature sensor* (only possible in combination with
SCU-S01 PCB).

15 General information

85