9 Commissioning
Fig. 24 Resetting factory setting
56
9.1.7
Resetting factory settings
Press the
-key several times until the
in the menu bar;
Select the installers menu using the
appears in the display;
Use the [-]-key or [+]-key to set installers code 0012;
Confirm with the
Press the [+] -key several times, df:x appears;
By default, the current value X for dF appears on the
display; as a check, compare this with the value of X on
the type plate; enter the value of X on the type plate with
the [-] key or the [+] key.
Press the
-key again, dV:y appears;
By default, the current value Y for dU appears on the
display; as a check, compare this with the value of Y on
the type plate; enter the value of Y on the type plate with
the [-] key or the [+]-key.
Press the
-key to confirm the values; the factory
settings have been reset.
symbol flashes
-key, c;de
-key; p1 appears;
C230 ECO-A