Deleting Control Stops Or Faults - DeDietrich C230 ECO-A 120 Installation, Operating And Service Manual

11 Control stops and faults
Fig. 36 Deleting faults
76

11.5.2 Deleting control stops or faults

The last message in the list in the display is er:cl (or bl:cl
with shutdowns)

-key; the display will show: 0
Press the
 Press the [+]-key to set the parameter to 1.

Press the -key; the fault memory is cleared

Press the -key twice to exit the fault memory.

With faultfinding, retrieving the operating status when the fault
occurred can contribute to faster rectification of the cause.
C230 ECO-A