D-Link DES-3010F Command Line Interface Manual page 10

DES-3026:4#config account
Command: config account
Next possible completions:
<username>
DES-3026:4#config account
Command: config account
Next possible completions:
<username>
DES-3026:4#_
In the above example, the command config account was entered without the required parameter <username>, the CLI returned
the Next possible completions: <username> prompt. The up arrow cursor control key was pressed to re-enter the previous
command (config account) at the command prompt. Now the appropriate user name can be entered and the config account
command re-executed.
All commands in the CLI function in this way. In addition, the syntax of the help prompts are the same as presented in this
manual  angle brackets < > indicate a numerical value or character string, braces { } indicate optional parameters or a choice of
parameters, and brackets [ ] indicate required parameters.
If a command is entered that is unrecognized by the CLI, the top-level commands will be displayed under the Available
commands: prompt.
DES-3026:4#the
Available commands:
..
config
disable
logout
reset
upload
DES-3026:4#
The top-level commands consist of commands such as show or config. Most of these commands require one or more parameters
to narrow the top-level command. This is equivalent to show what? or config what? Where the what? is the next parameter.
For example, if you enter the show command with no additional parameters, the CLI will then display all of the possible next
parameters.
DES-3000 Series Layer 2 Switch CLI Reference Manual
Figure 2-4. Using the Up Arrow to Re-enter a Command
?
create
download
ping
save
Figure 2-5. The Next Available Commands Prompt
cable_diag
delete
enable
reboot
show
6
clear
dir
login
reconfig
smtp