D-Link DES-3010F Command Line Interface Manual page 221

show ssh authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To show the SSH user authentication method:
DES-3026:4# show ssh authmode
Command: show ssh authmode
The SSH Authmode
Password
Publickey : Enabled
Hostbased : Enabled
DES-3026:4#
config ssh user
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to show user authentication method.
show ssh authmode
The show ssh authmode command displays the user authentication
method.
None.
None.
: Enabled
Used to update user information for ssh configuration.
config ssh user <username 15> authmode [publickey |password
|hostbased [hostname
<domain_name 32> <ipaddr>]]
The config ssh user command update the ssh user information.
<username>  The user name.
publickey  Specifies user authentication method.
password  Specifies user authentication method.
hostbased  Specifies user authentication method.
hostname  Specifies host domain name.
hostname_ip  Specifies host domain name and IP address.
<domain_name>  Specifies the host name if configuration is in host-based
mode.
<ipaddr>  Specifies host IP address if configuring host-based mode.
Only Administrator-level
Note: The user account must be created.
<domain_name
users can issue
217
32> |hostname_ip
this command.