D-Link DES-3010F Command Line Interface Manual page 166

delete cpu access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the CPU access profile with a profile ID of 1:
DES-3026:4#delete cpu access_profile profile_id 1
Command: delete cpu access_profile profile_id 1
Success.
DES-3026:4#
config cpu access_profile
Purpose Used to configure a cpu access profile used for CPU Interface Filtering and to define specific
values that will be used to by the Switch to determine if a given packet should be forwarded or
filtered. Masks entered using the create cpu access_profile command will be combined,
using a logical AND operational method, with the values the Switch finds in the specified frame
header fields. Specific values for the rules are entered using the config cpu access_profile
command, below.
Syntax config cpu access_profile profile_id <value 1-3> [add access_id <value 1-5> [ethernet
{vlan <vlan_name 32> | source_mac <macaddr> | destination_mac <macaddr> | 802.1p
<value0-7> | ethernet_type <hex 0x0-0xffff>} | ip {vlan <vlan_name 32> | source_ip
<ipaddr> | destination_ip <ipaddr> | dscp <value 0-63> | [icmp {type <value 0-255> code
<value 0-255>} | igmp {type <value 0-255>} | tcp {src_port <value 0-65535> | dst_port
<value 0-65535> | {urg | ack | psh | rst | syn | fin}]} | udp {src_port <value 0-65535> |
dst_port <value 0-65535>} | protocol_id <value 0 - 255> {user_define <hex 0x0-
0xffffffff>}]} | packet_content {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> <hex 0x0-0xffffffff>| offset_16-31 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex
0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff>
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>}] port [<portlist> | all] [permit
| deny] | delete access_id <value 1-5>]
Description
The config cpu access_profile command is used to configure a CPU access profile for CPU
Interface Filtering and to enter specific values that will be combined, using a logical AND
operational method, with masks entered with the create cpu access_profile command,
above.
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to delete a previously created access profile or CPU access profile.
delete cpu access_profile profile_id <value 1-3>
The delete cpu access_profile command is used to delete a previously
created CPU access profile.
profile_id <value 1-3>  Enter an integer between 1 and 5 that is used to
identify the CPU access profile to be deleted with this command. This value
is assigned to the access profile when it is created with the create cpu
access_profile command.
Only Administrator-level users can issue this command.
162