D-Link DES-3010F Command Line Interface Manual page 82

create syslog host
Parameters Numerical
Code
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
local0  Specifies that local use 0 messages will be sent to the remote host. This
corresponds to number 16 from the list above.
local1  Specifies that local use 1 messages will be sent to the remote host. This
corresponds to number 17 from the list above.
local2  Specifies that local use 2 messages will be sent to the remote host. This
corresponds to number 18 from the list above.
local3  Specifies that local use 3 messages will be sent to the remote host. This
corresponds to number 19 from the list above.
local4  Specifies that local use 4 messages will be sent to the remote host. This
corresponds to number 20 from the list above.
local5  Specifies that local use 5 messages will be sent to the remote host. This
corresponds to number 21 from the list above.
local6  Specifies that local use 6 messages will be sent to the remote host. This
corresponds to number 22 from the list above.
local7  Specifies that local use 7 messages will be sent to the remote host. This
corresponds to number 23 from the list above.
udp_port <int>  Specifies the UDP port number that the syslog protocol will use to send
messages to the remote host.
ipaddress <ipaddr>  Specifies the IP address of the remote host where syslog messages
will be sent.
state [enable | disable]  Allows the sending of syslog messages to the remote host,
specified above, to be enabled and disabled.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To create syslog host:
DES-3000 Series Layer 2 Switch CLI Reference Manual
Facility
kernel messages
user-level messages
mail system
system daemons
security/authorization messages
messages generated internally by syslog
line printer subsystem
network news subsystem
UUCP subsystem
clock daemon
security/authorization messages
FTP daemon
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
78