D-Link DES-3010F Command Line Interface Manual page 65

config dhcp_relay option_60 default
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To config dhcp_relay option 60 default rule:
DES-3026:4# config dhcp_relay option_60 default drop
Command: config dhcp_relay option_60 default drop
Success
DES-3026:4#
show dhcp_relay option_60
Purpose
Syntax
Description
Parameters
Restrictions
DES-3000 Series Layer 2 Switch CLI Reference Manual
Config dhcp_relay option_60 default relay servers.
config dhcp_relay option_60 default [relay <ipaddr>| mode
[drop|relay]]
When there are no matching servers found for the packet based on
option 60, the relay servers will be determined by the default relay
server setting. When there is no match found for the packet, the
relay server will be determined based on the default relay servers.
When drop is specified, the packet with no matching rules found will
be dropped without further process. If the setting is no- drop, then
the packet will be processed further based on option 61. The final
relay servers will be the union of option 60 default relay servers and
the relay servers determined by option 61.
<ipaddr> – The specified ipaadress for dhcp_relay forward. Specify
a relay server IP for the packet that has matching option 60 rules.
drop – Specify to drop the packet that has no matching option 60
rules.
relay – The packet will be relayed based on the relay rules.
Only Administrator-level users can issue this command.
Used to show dhcp_relay option_60 entry.
show dhcp_relay option_60 {[string <desc 255>| ipaddress <
ipaddr>|default]}
This show dhcp_relay option_60 entry by the user specified.
<ipaddr> – Show the entry whose ipaddress equals the specified
ipaddress.
string – Shows the entry whose string equals the string of the
specified ipaddress.
default – Shows the default behaviour of the dhcp_relay option60.
None
61