D-Link DES-3010F Command Line Interface Manual page 220

Data Integrity Algorithm
--------------------------
MD5
SHA1
Public Key Algorithm
--------------------------
RSA
DSA
Success.
DES-3026:4#
config ssh authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To config the SSH user authentication method:
DES-3026:4# config ssh authmode publickey enable
Command: config ssh authmode publickey enable
Success.
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
: Enabled
: Enabled
: Enabled
: Enabled
Used to update user authentication for SSH configuration.
config ssh authmode [password|publickey|hostbased][enable|disable]
The config ssh authmode command updates the SSH user information.
password  Specifies user authentication method.
publickey  Specifies user authentication method.
hostbased  Specifies user authentication method.
enable  Enables user authentication method.
disable  Disables user authentication method.
Only Administrator-level users can issue this command.
216