D-Link DES-3010F Command Line Interface Manual page 112

config dscp_mapping
Description
Parameters
Restrictions
Example usage:
To configure CoS mapping for DSCP:
DES-3026:4#config dscp_mapping dscp_value 1 class 0
Command: config dscp_mapping dscp_value 1 class 0
Success
DES-3026:4#
show dscp_mapping
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display current CoS mapping for DSCP:
DES-3026:4#show dscp_mapping dscp_value 13
Command: show dscp_mapping dscp_value 13
DSCP
---------------------
13
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
This is used to map the 64-level DSCP priority to the 4-level class of service
priority used in the Switch.
dscp_value <0 – 63> – The DSCP priority level being mapped. Each DSCP
level must be configured separately to be mapped.
class <class_id 0-3> – The class of service level being mapped to.
Only Administrator-level users can issue this command.
To display current DSCP mapping.
show dscp_mapping {dscp_value <value 0-63>}
Use this to display the CoS priority level currently mapped for DSCP
levels.
dscp_value <value 0-63> – Specify a DSCP value to view the
current value mapped to it in the Switch.
Only Administrator-level users can issue this command.
Class
0
108