D-Link DES-3010F Command Line Interface Manual page 115

config 802.1p user_priority
Restrictions
Example usage:
To configure 802.1 user priority on the Switch:
show 802.1p user_priority
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show 802.1p user priority:
DES-3026:4# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0
Priority-1
Priority-2
Priority-3
Priority-4
Priority-5
Priority-6
Priority-7
DES-3026:4#
DES-3000 Series Layer 2 Switch CLI Reference Manual
service the 802.1p priority value (specified above) will be mapped.
Only Administrator-level users can issue this command.
DES-3026:4# config 802.1p user_priority 1 3
Command: config 802.1p user_priority 1 3
Success.
DES-3026:4#
Used to display the current mapping between an incoming packet's
802.1p priority value and one of the Switch's four hardware priority
classes of service.
show 802.1p user_priority
The show 802.1p user_priority command displays the current
mapping of an incoming packet's 802.1p priority value to one of the
Switch's four hardware priority classes of service.
None.
None.
-> <Class-1>
-> <Class-0>
-> <Class-0>
-> <Class-1>
-> <Class-2>
-> <Class-2>
-> <Class-3>
-> <Class-3>
111