D-Link DES-3010F Command Line Interface Manual page 9

When you enter a command without its required parameters, the CLI will prompt you with Next possible completions: message.
DES-3026:4#show
Command: show
Next possible completions:
802.1p
address_binding
auth_session_statistics
bandwidth_control
cpu_access_profile
fdb
iproute
log_save_timing
multicast
ports
scheduling_mechanism
sim
ssh
terminal_line
traffic_segmentation
vlan
DES-3026:4#
In this case, the command show was entered without a parameter. The CLI will then prompt you to enter the next possible
completions with the message, Next possible completions:. Every command in the CLI has this feature, and complex commands
have several layers of parameter prompting.
In addition, after typing any given command plus one space, you can see all of the next possible sub-commands, in sequential
order, by repeatedly pressing the Tab key.
To re-enter a previously entered command at the command prompt, press the up arrow cursor key. The previous command will
appear at the command prompt.
DES-3000 Series Layer 2 Switch CLI Reference Manual
802.1x
arpentry
command_history
dhcp_relay
igmp
lacp_port
loopdetect
multicast_fdb
radius
smtp
stp
time
vlan_trunk
Figure 2-3. Example Command Parameter Help
account
auth_client
auth_statistics
config
dscp_mapping
igmp_snooping
link_aggregation
mac_notification
packet
router_ports
serial_port
snmp
switch
traffic
trusted_host
5
acct_client
auth_diagnostics
autoconfig
cos
error
ipif
log
mirror
port_security
scheduling
session
sntp
syslog
utilization