D-Link DES-3010F Command Line Interface Manual page 222

Example usage
To update user "test" authmode:
DES-3026:4# config ssh user test publickey
Command: config ssh user test publickey
Success.
DES-3026:4#
show ssh user authmode
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To show user information about SSH configuration:
DES-3026:4# show ssh user
Command: show ssh user
Current Accounts
Username
-------------
test
Total Entries : 1
DES-3026:4#
config ssh server
Purpose
Syntax
Description
Parameters
DES-3000 Series Layer 2 Switch CLI Reference Manual
Used to show SSH user information.
show ssh user
The show ssh user command displays SSH user information.
None.
None.
Authentication
-------------
publickey
Used to configure the SSH server.
config ssh server {maxsession <int 1-8> |contimeout <sec 120-600>
|authfail <int 2-20> |rekey [10min |30min |60min |never]}
The config ssh server command configures SSH server general
information.
maxsession <int 1-8>  Specifies SSH server max session at the same
time.
contimeout <sec 120-600>  Specifies SSH server connection timeout.
authfail <int 2-20>  Specifies user max fail attempts.
218