Revolabs Fusion Setup Manual page 3

Revolabs Fusion™
Great audio, wireless mobility, and simple to install!
Simply plug the cable into the AV system or phone system and it
works. No software configuration is necessary. Even the Fusion box
is designed to be easy to use– vertically or horizontally. No
equipment rack needed. Just set the Fusion system on the credenza.
Video Conferencing
Revolabs Fusion Wireless Microphone Solution is compatible with all
of the major video-conferencing solutions, including Lifesize,
Polycom, Sony, and Tandberg. It includes a remote control to control
the sound volume. Decide on where you want to put the Fusion
system, whether you want to place it vertically or horizontally, plug in
the cables and you are ready to have great wireless audio in any
conference room.
Audio Conferencing
Plug the Fusion Wireless Microphone Solution into an analog
telephone jack and you are on your way to great wireless
teleconference calls. There is a remote control dialer to dial the
conference phone number. You may connect to powered speakers,
connect to existing speaker system or connect to a new room speaker
system to hear the call. Decide on where you want to put the Fusion
system, whether you want it vertical or horizontal, plug in the cables
and you are ready to have great wireless audio in any conference
room.
Flexible
The Fusion System supports any combination of Solo Wireless
Microphones- Wearable, Tabletop, or XLR adapter for a handheld
microphone. Choose the right microphone for your meeting
dynamics.
Rechargeable
Revolabs Wireless Microphones have a rechargeable battery that
provides eight hours of talk time after each full charge. Revolabs
Wireless Microphones recharge to 85% capacity in approximately 45
minutes.
Secure
All of Revolabs Wireless Microphones use 128-bit authentication, so
that no one can listen in.
Page 3