When The Communication Unit Is Used - Mitsubishi GOT1000 GT15 User Manual

5.3.3

When the communication unit is used

Use the following communication unit with the GOT to ensure compliance with the EMC Directive.
The GOT does not comply with the EMC Directive when connected with other than followings.
Connection method
Bus connection
Direct connection to CPU
Computer link connection
Ethernet connection
Microcomputer connection
Third party PLC
connection
The GOT does not comply with the EMC Directive when it is used with the following unit.
Product name
MELSECNET/10 communication unit GT15-75J71LP23-Z, GT15-75J71BR13-Z
CC-Link communication unit
5.3.4 Cables
(1) Applicable cables
Refer to the GOT1000 Series Connection Manual for the applicable cables for connecting a GOT
and PLC.
(2) Adjusting a cable for the EMC Directive compliance
Modify the cables (including user-produced cable) to ensure compliance with the EMC Directive.
For details, refer to Section 5.4.2.
Communication unit used
GT15-QBUS
GT15-QBUS2
GT15-ABUS
GT15-ABUS2
GT15-75QBUSL
GT15-75QBUS2L
GT15-75ABUSL
GT15-75ABUS2L
GOT RS-232 interface
GT15-RS2T4-9P
GOT RS-232 interface
GT15-RS2T4-9P
GT15-J71E71-100
GOT RS-232 interface
GT15-RS2T4-9P
GOT RS-232 interface
GT15-RS2T4-9P
Model name
G15-75J61BT13-Z
5.3 EMC Directive-Compliant System Configuration
Hardware version of the communication unit
(Production year and month)
Version D or later
(Oct., 2005)
Version C or later
(Oct., 2005)
Version G or later
(Mar., 2005)
Version A or later
Version A or later
Version B or later
(Mar., 2005)
Version A or later
Version A or later
5.3.3 When the communication unit is used
1
2
3
4
5
6
7
8
5
- 10