2
Serial communication unit, Ethernet communication unit
The following explanation uses the Ethernet communication units as an example.
The serial communication unit can be installed with the same procedure.
(1) Unit installation
1
Power OFF the GOT.
2
Remove one of the extension unit covers of the GOT.
.
3
Fit the communication unit along the groove of the GOT case.
4
Fasten the communication unit by tightening its mounting screws (2 places) with tightening torque
0.36 to 0.48 N·m.
8.5 Communication Unit
8.5.2 Installing procedure
1
2
3
4
5
6
7
8
8
- 14