10.1.3 Communication setting contents
This section describes setting items and display contents for Communication Setting.
(2)
(4)
(4)
(1) Channel-Driver assign
Channel No. can be assigned to the communication driver installed in the GOT.
(a) Communicating without setting [Communication Setting] of GT Designer2
Even without setting [Communication Setting] on GT Designer2, communication with controller
is available by assigning channel No. with this function.
(
10.1.4
(b) Changing the assignment of communication drivers to channels in the utility
Without using GT Designer2, the assignment of communication drivers to channels can be
changed.
(When change a communication driver, the alternative communication driver has to be
installed in GOT in advance.)
(2) Standard interface display BOX
Display the communication interface included as standard in GT15
There are the following 2 types.
RS232 ••••• For communicating with PC (GT Designer2), controller
USB •••••••• For communicating with PC (GT Designer2)
(3) Extend interface display BOX
The name of the communication unit installed in the extend interface is displayed.
(Displays [None] when the communication unit is not mounted.)
Refer to 7.5 Communication Unit for details related to the communication unit.
GOT front face
USB interface (Standard interface)
(mini)
(2)
(5)
(5)
(3)
(5)
Channel-Driver assign operation)
(1)
Extend interface
GOT rear face
RS-232 interface (Standard interface)
10.1 Communication Setting
10.1.3 Communication setting contents
.
10
9
10
11
12
13
14
15
16
- 2