Utility Function; Utility Execution - Mitsubishi GOT1000 GT15 User Manual

9. UTILITY FUNCTION

Utility is a function, which carries out connection of GOT and controller, screen display and operation method
settings, program/data control and self-check etc.
Refer to the following for the utility function list.
9.3 Utility Display

9.1 Utility Execution

For utility execution, utility has to be displayed by installing BootOS and standard monitor OS in the C drive
(built in flash memory).
There are following three types for the installing BootOS and standard monitor OS methods.
1) GT Designer2 GOT
GT Designer2
2) GT Designer2 Memory card
OS file
write
GT Designer2
3) GOT Memory card
OS file
upload
GOT
Refer to the following for the installation which uses GT Designer2.
GT Designer2 Version
Refer to the following for the installation which uses GOT.
18. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
Via USB interface or
RS-232 interface
BootOS or standard OS installation
GOT
BootOS or standard
monitor OS installation
Install the memory
card in GOT
Memory card
GOT
BootOS, standard
monitor OS installation
Install the memory
card in GOT
Memory card
Basic Operation/Data Transfer Manual
• Installed directly from the GT Designer2
GOT
• When GOT is remote, installed easily
GOT
using the memory card
• Install OS from GOT to GOT using
GOT
memory card
9.1 Utility Execution
1 9
10 2
11 3
12 4
13 5
14 6
15 7
16 8
9
- 1