6
Disconnect the cable connector of the backlight from the GOT side connector.
7
Remove the cables from the 2 slits (black).
(Expanded figure of part B in (6))
8
Press the backlight fixing latch (black) with your finger, and pull out the backlight to the left.
9
Mount a new backlight in the reverse procedure of removal.
When connecting the cable connector of the backlight to the GOT side connector, connect by it as
shown below.
Also attach the case in the reverse procedure of removal. (Tighten the GOT rear fixing screws within the
torque range of 0.36 to 0.48N·m).
When attaching the case, take care of not biting the cables between the case and the GOT.
19
19.6 Backlight Replacement
- 16
19.6.2 Replacement procedure of backlight
A
(Expanded figure of part A in
Latch
B
)
6