System Configuration When Emc Directive Is Applicable; Overall Configuration; Connection Format - Mitsubishi 900 Series User Manual

8 EMC DIRECTIVE

8.2 System Configuration when EMC Directive is Applicable

8.2.1 Overall Configuration

A950/951/953GOT
Communication cable*1
For A950GOT
RS-422 cable
For A951GOT
Bus connection cable
For A953GOT
RS-232C cable

8.2.2 Connection Format

Item Bus connection
A950GOT
A951GOT-Q
A951GOT
A953GOT
A956GOT
8 - 5
Connection conditions and models where the EMC directive is applicable are shown
below.
GOT*1
Communication module*1
Bus connection module
CC-Link communication module
Communication cable*1
Bus connection cable
CC-Link dedicated cable
1 See section 8.2.3 for information about models and hardware versions that are
applicable to the EMC directive.
2 EMC directive is not applicable when using an option module.
Connection conditions where the A95*GOT is applicable to the EMC directive are
shown below.
: EMC directive applicable
CPU Direct connection
RS-232C
(QCPU) (A/QNACPU)
— —
—
—
—
—
POINT
If connecting to a PLC not from this company (MELSEC-Q series, MELSEC-QnA
series, MELSEC-A series), refer to the manual of the connected device (PLC,
microcomputer) for information about the applicability of the EMC directive.
Option module*2
A956GOT
: EMC directive not applicable : Connection impossible
MELSEC
NET
RS-422
connection
—
— —
— —
— —
—
MELSEC-GOT
Printer interfavce module
External I/O interface module
Memorycard interface module
Computer link
connection
CC-link
RS- RS- connection
232C 422
— —
— — —
— — —
— —
— —
Ethernet
connection
—
—
—
—
8 - 5