Mitsubishi GOT1000 GT15 User Manual page 87

3 Push the CF card eject button of the GOT to lift the CF card and remove it.
Precautions for removing the CF card
1. While the CF card access LED is on, do not install/remove the CF card or power
2. When ejecting the CF card, support it by hand since it may pop out.
3. Do not install/remove the CF card while downloading the monitor data or other
off the GOT.
To do so may cause data corruption or malfunction.
Failure to do so may cause a fall of the CF card leading to failure or damage of
the card.
data by the RS-232 transmission.
To do so may cause a faulty communication of the GT Designer2 and the data
cannot be downloaded normally.
8.1.2 Installing and removing procedures of the CF card
8
8.1 CF Card
- 4
1
2
3
4
5
6
7
8