Mitsubishi GOT1000 GT15 User Manual page 320

Error code and reference manual
Error source
Controller
GOT
Network
CPU
Servo
amplifier
*1 The assigned error code for FXCPU is 100 to 109, which displays the status of M8060 to M8069.
*2 The error code displayed on GOT is calculated by changing the error code (Hexadecimal) displayed on the servo
20
20.1 Error Contents Display
- 2
Error code
0 to 99
Error code of CPU (for ACPU)
(Value of D9008)
Error code of the following controllers
• FXCPU*
100 to 299
• Third party PLC
• Temperature controller (OMRON
300 to 399 Error code of the GOT main unit function
Error code of the GOT communication
400 to 499
function
500 to 699 Error code of the GOT main unit function
800 to 999 Error code of network
1000 to 10000 Error code of CPU
(Value of SD0) (for QCPU, QnACPU)
20016 to 20237 Error code of servo amplifier
(Example) When the error code (100) error occurs, correct the error according to the M8060 description.
amplifier to the decimal number and adding 20000 to it.
When referring to the manual of servo amplifier by the error code displayed as a GOT system alarm, subtract
20000 from the GOT error code and change its lower three digits to the hexadecimal number.
(Example: When GOT system alarm is 20144, the error code of servo amplifier becomes 90H.)
Contents
1
temperature controller only)
Reference
User's manual of the ACPU
connected with GOT
User's manual of the FXCPU
connected with GOT
When connecting a third-party
PLC, deal with the error
according to the error message.
20.2 List of Error Message/
System Alarm
Reference manual of the
network connected with GOT
User's manual of the QCPU and
QnACPU connected with GOT
User's manual of the servo
amplifier connected to GOT