Mitsubishi GOT1000 GT15 User Manual page 327

Error
Error message
code
Warning! Touch panel needs
504
replacement soon.
Warning! Built-in Flash ROM
505
needs replacement soon.
Warning! Backlight needs
506
replacement.
Warning! Display section needs
507
replacement.
Warning! Touch panel needs
508
replacement.
Warning! Built-in Flash ROM
509 needs replacement. Change the
GOT.
510 Clock data input out of range
User notifies the touching count of the touch key that reaches to
more than 80 % of the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the touch key. Moreover, GOT can also
be restored by turning off the notification signal manually. In
such case, turn it OFF after changing the setting value to the
integrated value or more.
User notifies the built in flash memory writing times which
reaches to more than 80 % of the setting time with the
dedicated GS.
The GOT must be replaced. In that case, the data backup and
the reestablishment of data are needed. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to the
integrated value or more.
User notifies the backlight power on addition time that reaches
more than setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the backlight. Moreover, GOT can also
be restored by turning off the notification signal manually. In
such case, turn it OFF after changing the setting value to the
integrated value or more.
User notifies the display section power on addition time which
reaches to more than the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the display section. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to the
integrated value or more.
User notifies the touching count of the touch key that reaches to
more than the setting time with the dedicated GS.
GOT can be restored by executing the addition times reset
function after replacing the touch key. Moreover, GOT can also
be restored by turning off the notification signal manually. In
such case, turn it OFF after changing the setting value to the
integrated value or more.
User notifies the built in flash memory writing times which
reaches to more than the setting time with the dedicated GS.
The GOT must be replaced. In that case, the data backup and
the reestablishment of data are needed. Moreover, GOT can
also be restored by turning off the notification signal manually.
In such case, turn it OFF after changing the setting value to the
integrated value or more.
The value that is input as clock data is out of the input enabled
range.
In this case, the input value is not accepted.
Confirm the input range of the value to be input as clock data,
and input the proper value again.
20.2 List of Error Message/System Alarm
Action
20
17
18
19
20
- 9