13.3.4 Operation of project information
1
Display operation of project information
2
Delete operation
This operation deletes the selected file.
1
Touch the drive in Select drive. The
project data in that drive will be displayed.
2
Touch the project data. It is then selected
and highlighted.
3
Refer to the following for operation of
delete, copy, property, data check,
download, upload.
Delete .....................
Copy .......................
Property .................
Data check .............
Download, setup
...............................
Upload, setup cancel
...............................
4
Touching
button closes the screen.
1
Touch and select the file to delete.
2
Screen mentioned left is displayed if
button is touched.
Delete
Confirm the deletion targeted file is
specified correctly.
If touch
button, the file is deleted.
OK
If touch
button, the deletion is
Cancel
canceled.
3
When the deletion completes, the dialog
box shown left is displayed.
If touch
button, the dialog is closed.
OK
13.3 Project Information
13.3.4 Operation of project information
9
10
11
this section
this section
this section
this section
12
this section
this section
13
14
15
16
13
- 19