Honda NHSO aeroBO 1983 Shop Manual page 14

LUBRICATION
OIL PUMP REMOVAL
NOTE:
Before removing the oil pump, clean the oil
pump and crankcase.
Remove the engine (Section 5).
Remove the starter motor (Page 15·13).
Disconnect the oil outlet line from the intake pipe.
Remove the oil pump attaching bolt and remove the
oil pump.
01
L PUMP INSPECTION
Remove the oil pump and inspect the following
items:
Damaged or weak O·rings
•
•
Damage to crankcase mating surface
Damage to pump body
•
•
Control lever operation
•
Worn or damaged pump gears
Oil leaks
•
CAUTION:
Do not disassemble the oil pump.
OIL PUMP INSTALLATION
Install the oil pump onto the crankcase.
CAUTION:
• Lubri c ate the pump gear and O·ring with
•
clean grease before installation.
Make sure that the oil pump is inserted into
the crankcase properly.
2 - 2
OIL PUMP
BOLT
O·RING
16
HONDA
NHSO
OIL OUTLET LINE
MATING SUR FACE
Date of Issue: May, 1983
© HONDA MOTOR CO., L
TO.