Honda NHSO aeroBO 1983 Shop Manual page 124

Apply silicone grease to the anchor contacting area
of each shoe and to the brake shoe contacting area
of the brake cam.
Install the brake cam.
Avoid getting grease on the inside o f the brake
drum or braking power will be reduced. Qean
the inside of the brake panel thoroughly.
Install the brake shoes.
Install the felt oil seal.
Install the wear indicator plate on the brake cam
shaft.
NOTE:
Align the wide tooth on the plate with the
wide groove on the camshaft.
Install the brake arm.
NOTE:
Align the punch marks· on the brake arm and
camshaft.
Torque the brake arm bolt.
TORQUE: 8-12 N·m
6-9 ft·lb)
(0.8-1.2 kg·m,
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
STEERING/FRONT WHEE L/BRAKE/SUSPENSION
.
133
BRAKE CAM
ALIGN
PUNCH MARKS
1 2 - 1 5