Honda NHSO aeroBO 1983 Shop Manual page 104

CRAN KCASE�RANKSHAFT
CRANKCASE ASSEMBLY
Install a new gasket and dowel pins on the crank·
case mating surface.
Assemble the crankcase halves; place the collar
(07965-GC70100) with the small O.D. against the
right crankshaft bearing. Thread the bolt from as­
sembly tool ( 07965-1480200) onto the crankshaft.
Hold the bolt and turn the nut clockwise to draw
the crankcase halves together.
Install the right oil seal; place the collar (07965-
GC70100) so its stepped end is against the crank·
case and oil seal.
Thread the bolt from as.sembly tool (07965-
1480200) onto the crankshaft. Hold the bolt and
turn the nut clockwise to install the oil seal into
place.
1 0- 6
DOWEL PINS
ASSEMBLY TOOL COLLAR
07965-GC70100 (INC. IN 07965-GC70000)
ASSEMBLING TOOL
07965-1480200 (INC. IN 07965-GC70000)
ASSEMBLING TOOL COLLAR
07965-GC70100 (INC. IN 07965-GC70000)
ASSEMBLY TOOL
07965-1480200 (INC. I N 07965-GC70000)
1 1 0
Date of Issue: May, 1 983
© HONDA MOTOR CO., LTD.