HONDA
NHSO
Remove the journal bearing from the crankshaft
with the bearing puller.
Remove the right and left oil seals.
NOTE:
Replace the oil seals with new ones whenever
disassembled.
CRANKSHAFT INSPECTION
Measure the connecting rod big end side clearance
with a feeler gauge.
SERVICE LIMIT:
mm {0.02
0.5
Measure the connecting rod big end radial clearance
at two points in the
and Y directions.
X
SERVICE LIMIT: 0.04 mm (0.0016 in)
Date of Issue: May, 1983
© HONDA MOTOR CO., L TO.
UNIVERSAL BEARING PULLER
07631-0010000 (NOT AVAILABLE I N U.S.A.,
EQUIVALENT AVAILABLE IN U.S.A.)
in)
107
CRAN KCASE/CRANKSHAFT
CRANKSHAFT JOURNAL BEARING
CRANKSHAFT
1 0-3