HONDA
NHBO
Install the countershaft, final gear and thrust wash
er.
Install a new gasket and dowel pins.
Install the transmission cover.
Install the movable driven face/clutch assembly
(Page 8·22).
Install the drive pulley, drive belt and left case cover
(Page 8-7).
Install the frame center cover (Section 11 ) .
Install the rear wheel (Page 1 3-3).
Pour the specified amount of oil through the filler
opening (Page 2-4).
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.
COUNTER SHAFT
THRUST WASHER
TRANSMISSION COVER
103
FINAL REDUCTION
FINAL GEAR
DOWEL PINS
9-7