HONDA
NH80
Inspect the drive face boss for wear or damage.
Measure t
e O.D. at the drive face conta
h
SERVICE LIMIT:
23.940 mm (0.9425
Replace if smaller than the service limit.
Check the face seal for wear or damage.
MOVABLE D R I V E FACE ASSEMBLY
Use 1 0-15g of grease and apply evenly to the in·
side of the drive face. Then install the weight rollers.
NOTE:
Specified grease:
Lithium based
•
Mitsubishi: HD-3
•
Nippon Sekiyu: Lipanox Deluxe 3
•
ldemitsu: Coronex
3
:
Date of Issue
May, 1 983
© HONDA MOTOR CO., LTD.
DRIVE AND DRIVEN PULLEYS/KICK STARTER/CLUTCH
ing face.
ct
in)
77
FACE SEAL
8-5