Honda NHSO aeroBO 1983 Shop Manual page 30

MAINTENANCE
Check the front and rear wheels for trueness.
Measure the tread depth at the center of the tires.
Replace the tires if the tread depth reaches the fol·
lowing limits:
tread depth:
Minimum
Front:
(0.03
0.8 mm in)
Rear:
0.8 mm (0.03 in)
STEERING HEAD BEARINGS
NOTE:
Check that the control cables do not interfere
with handlebar rotation.
Raise the front wheel off the ground and check that
the handlebar rotates freely.
the handlebar moves unevenly, binds, or has verti·
If
cal movement, adjust the steering head bearing by
turning the steering head adjusting nut (Page 1 2·24).
3 - 1 2
32
HONDA
NHSO
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.
-