Reed Valve - Honda NHSO aeroBO 1983 Shop Manual

FUE L SYSTEM

REED VALVE

REMOVAL
Remove the frame center cover.
Remove the carburetor (Page 4·3).
Remove the engine shrouds (Page 6·2).
Remove the intake pipe.
Remove the reed valve.
INSPECTION
Check the reed valve for damaged or weak reeds.
Check the valve seat for cracks, damage or clearance
between the seat and reed. Replace the valve if
necessary.
CAUTION:
Do not disassemble or bend the reed stopper.
To do so can cause loss of power and engine
damage. I f the stopper, reed or valve seat is
faulty, replace them as a unit.
INSTALLATION
This installation sequence is essentially the reverse
order of removal.
After installation, check for secondary leaks.
4 - 1 2
INTAKE PIPE
REED VALVE
REED VALVE
46
HONDA
NH80
REED
STOPPER
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.
-