Honda NHSO aeroBO 1983 Shop Manual page 60

CYLINDER HEAD/CY L I N D E R/PISTON
CY L I N D E R H E A D I N STALLAT ION
Install the cylinder head on the cylinder using a new
cylinder head gasket.
Install and tighten the four cylinder head bolts in a
criss-cross pattern.
8-12 N·m (0.8-1.2 kg-m, 6-9ft-lb)
TORQUE:
Install engine shroud B.
Clean the cylinder head mating face of the control
box and install the control box.
Install engine shroud A.
Install all removed parts in the reverse order of re­
moval.
Perform the following inspections:
•
Compression test (Page 3-8)
•
Check for any abnormal engine noise.
•
Check for cylinder air leaks.
6 - 1 0
CYLINDER HEAD BOLTS
SHROUD A
64
HONDA
NHSO
BOX
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.