The front shock absorber of a 2009 Honda Lead 110 should be filled with 89.0 ± 1.0 cm³ (3.01 ± 0.03 US oz, 3.13 ± 0.04 Imp oz) of fork fluid.
This answer is automatically generated
P. T wijayasiri
February 25, 2025
How much oil does the rear socket hold?
1 comments:
Mr. Anderson
February 25, 2025
The oil capacity of the final reduction (rear socket) for a 2009 Honda LEAD 110 is: - After draining: 0.10 liter (0.11 US qt, 0.09 lmp qt) - After disassembly: 0.12 liter (0.13 US qt, 0.11 lmp qt)
Need help?
Do you have a question about the LEAD 110 2009 and is the answer not in the manual?
Questions and answers
Какая компрессия должна быть нормальной на Хонда лид 110?
The normal compression for a Honda Lead 110 2009 is 1,098 kPa (11.2 kg/cm², 159 psi) at 550 rpm.
This answer is automatically generated
Speedometer bulb? Type number?
The speedometer bulb for a 2009 Honda LEAD 110 is a 12 V – 1.7 W bulb.
This answer is automatically generated
How much oil should I put in the front shock absorber?
ඉදිරිපස ෂොකට්සෝබරයට දැමිය හැකි ඔයිල් ප්රමාණය කොපමණද
ඉදිරිපස ෂොකට්සෝබරයට කොපමණ ඔයිල් ප්රමාණයක් දැමිය යුතු ද
The front shock absorber of a 2009 Honda Lead 110 should be filled with 89.0 ± 1.0 cm³ (3.01 ± 0.03 US oz, 3.13 ± 0.04 Imp oz) of fork fluid.
This answer is automatically generated
How much oil does the rear socket hold?
The oil capacity of the final reduction (rear socket) for a 2009 Honda LEAD 110 is:
- After draining: 0.10 liter (0.11 US qt, 0.09 lmp qt)
- After disassembly: 0.12 liter (0.13 US qt, 0.11 lmp qt)
This answer is automatically generated
Where is the relay for the blinkers?