SUSPENSION
Do not ride a scooter with faulty suspension.
Loose, worn or damaged suspension parts
pair vehicle stability and control.
FRONT
Check the action of
front fork/shocks
the
pressing them several times.
Check the entire fork assembly for damage.
Replace damaged components which cannot be re
paired.
nuts and
Tighten all
bolts.
REAR
Place the scooter on its center stand.
Move the rear wheel sideways with force to see if the
engine hanger bushings are worn.
Replace the hanger bushings if there is any looseness.
Check the shock absorber for damage.
Tighten all rear suspension nuts and bolts.
NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened to
their correct torque values (Section
shown in the Maintenance Schedule (Page
Check all cotter pins, safety clips, hose clamps and
cable stays.
WHEELS
NOTE:
Tire pressure should be checked when tires are
COLD.
Check the tires for cuts, imbedded nails, or other
sharp objects.
RECOMMENDED TIRES AND PRESSURES:
3.50-1
Tire size
90
Up to
kg
1200
lbs) load
(150,
Cold tire
pressure
90
(200
psi (kPa,
kg
lbs)
(150,1.5)
kg/em•)
and up to vehicle
capacity load
Date of Issue: May,
1983
© HONDA MOTOR CO., LTD.
im
com·
by
at the intervals
1)
3-2).
Front
Rear
3.50·1 0-4PR
R
0-4P
21
24
1.5)
(175, 1.75)
21
!250, 2.5)
31
MAINTENANCE
3 - 1 1