Honda NHSO aeroBO 1983 Shop Manual page 159

ELECTRICAL EQUIPMENT
STARTER MOTOR REMOVAL
Remove the engine (Section 5).
Remove the two bolts attaching the starter motor
and remove the starter motor.
STARTER MOTOR D I SASSEMBLY
Disconnect the starter wires.
NOTE:
• The brush springs will pop out when re­
moving the brush holder plate.
• Record the number and location of the
commutator thrust washers.
BRUSH INSPECTION
Measure the length of each brush.
SERVICE LIMIT:
mm
3.0 (0.12
1 5- 1 2
in)
170
STARTER MOTOR
ROTOR
Date of Issue: May, 1983
© HONDA MOTOR CO., LTD.