Fitting Electronics Cover - Invacare Aquatec Ocean E-VIP User Manual

Aquatec® Ocean E-VIP
Adjusting Heel Strap
1. Open hook and loop fastener on heel strap D.
2. Set heel strap to desired length.
3. Close hook and loop fastener again.

4.10 Fitting Electronics Cover

1. Turn both footrests outwards or remove them.
2. Use the hand control to move the product to the highest
position, refer to 5.4 Using Hand Control, page 23.
3.
Remove terminal strip A.
4.
Fold safety bar B forward.
18
Fig. 4-12
Fig. 4-13
5. Remove the long connector cable C (180 mm) between
the battery pack and electronics box.
6. Attach short connector cable D (110 mm).
7. Fold the safety bar back again.
8. Reattach the terminal strip.
9.
Swap blue plug E of the charging socket with the plug
with the hole F.
10. Insert connector G on the electronics cover into charger
socket H of the battery pack.
Risk of Damage
– Make sure the connector is positioned
correctly.
Fig. 4-14
1556395-D