Show Garp Timer; Editing Vlan Groups; Vlan Database; Commands For Editing Vlan Groups - Edge-Core Direk Tronik 24/48-Port Management Manual

show garp timer

This command shows the GARP timers for the selected interface.
Syntax
show garp timer [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: Always 1)
- port - Port number. (Range: 1-24/48)
• port-channel channel-id (Range: 1-24)
Default Setting
Shows all GARP timers.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer:
Leave timer:
Leaveall timer: 1000 centiseconds
Console#
Related Commands
garp timer (52-4)

Editing VLAN Groups

Command

vlan database

vlan
vlan database
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Command Mode
Global Configuration
20 centiseconds
60 centiseconds
Table 52-3 Commands for Editing VLAN Groups
Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
Editing VLAN Groups
Mode
GC
VC
52
Page
52-5
52-6
52-5