Main Menu; Table; Switch Main Menu - Edge-Core Direk Tronik 24/48-Port Management Manual

3
Configuring the Switch

Main Menu

Using the onboard web agent, you can define system parameters, manage and
control the switch, and all its ports, or monitor network conditions. The following
table briefly describes the selections available from this program.
Menu
System
System Information
Switch Information
Bridge Extension
IP Configuration
IPv6 Configuration
IPv6 Configuration
IPv6 General Prefix
IPv6 Neighbor
Jumbo Frames
File Management
Copy Operation
Delete
Set Startup
Line
Console
Telnet
Log
Logs
System Logs
Remote Logs
SMTP
Renumbering
Reset
SNTP
Configuration
Clock Time Zone
3-4
Table 3-2 Switch Main Menu
Description
Provides basic system description, including contact information
Shows the number of ports, hardware/firmware version
numbers, and power status
Shows the bridge extension parameters
Sets the IPv4 address for management access
Configures IPv6 interface addresses and static neighbors
Configures IPv6 interface address and protocol settings
Configures IPv6 general prefix for network portion of addresses
Configures IPv6 neighbor discover protocol and static neighbors
Enables support for jumbo frames
Allows the transfer and copying files
Allows deletion of files from the flash memory
Sets the startup file
Sets console port connection parameters
Sets Telnet connection parameters
Sends error messages to a logging process
Stores and displays error messages
Configures the logging of messages to a remote logging process
Sends an SMTP client message to a participating server
Renumbers the units in the stack
Restarts the switch
Configures SNTP client settings, including a specified list of
servers
Sets the local time zone for the system clock
Page
4-1
4-1
4-3
4-5
5-1
5-4
5-4
5-10
5-11
4-6
6-1
6-1
6-1
6-1
7-1
7-1
8-1
9-1
9-1
9-1
9-2
9-4
4-7
4-7
10-1
10-1
10-2