Show Interfaces Protocol-Vlan Protocol-Group - Edge-Core Direk Tronik 24/48-Port Management Manual

54
Protocol-based VLAN Commands

show interfaces protocol-vlan protocol-group

This command shows the mapping from protocol groups to VLANs for the selected
interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: Always 1)
- port - Port number. (Range: 1-24/48)
• port-channel channel-id (Range: 1-24)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for protocol
group 1 will be mapped to VLAN 2:
Console#show interfaces protocol-vlan protocol-group
Port ProtocolGroup ID
---------- ------------------ -----------
Eth 1/1
Console#
54-4
Vlan ID
1 vlan2