Chapter 1: Introduction; Key Features; Table - Edge-Core Direk Tronik 24/48-Port Management Manual

Chapter 1: Introduction

This switch provides a broad range of features for Layer 2 switching. It includes a
management agent that allows you to configure the features listed in this manual.
The default configuration can be used for most of the features provided by this
switch. However, there are many options that you should configure to maximize the
switch's performance for your particular network environment.

Key Features

Feature
Configuration Backup
and Restore
Authentication
Access Control Lists
DHCP Client
DNS
Port Configuration
Rate Limiting
Port Mirroring
Port Trunking
Broadcast Storm
Control
Address Table
IP Version 4 and 6
IEEE 802.1D Bridge
Store-and-Forward
Switching
Spanning Tree
Algorithm
Virtual LANs
Table 1-1 Key Features
Description
Backup to TFTP server
Console, Telnet, web – User name / password, RADIUS, TACACS+
Web – HTTPS
Telnet – SSH
SNMP v1/2c - Community strings
SNMP version 3 – MD5 or SHA password
Port – IEEE 802.1X, MAC address filtering
Supports up to 32 ACLs, 96 MAC rules, 96 IP rules, and 96 IPv6 rules
Supported
Proxy service
Speed and duplex mode and flow control
Input and output rate limiting per port
One or more ports mirrored to single analysis port
Supports up to 24 trunks using either static or dynamic trunking (LACP)
Supported
Up to 8K MAC addresses in the forwarding table, 1024 static MAC addresses
Supports IPv4 and IPv6 addressing, management, and QoS
Supports dynamic data switching and addresses learning
Supported to ensure wire-speed switching while eliminating bad frames
Supports standard STP, Rapid Spanning Tree Protocol (RSTP), and Multiple
Spanning Trees (MSTP)
Up to 256 using IEEE 802.1Q, port-based, protocol-based, private VLANs, and
802.1Q tunneling (QinQ)
1-1