Chapter 41: User Authentication Commands; User Account Commands; Username; Authentication Commands - Edge-Core Direk Tronik 24/48-Port Management Manual

Chapter 41: User Authentication Commands

You can configure this switch to authenticate users logging into the system for
management access using local or remote authentication methods.
Command Group
User Accounts
Authentication Sequence
RADIUS Client
TACACS+ Client
Web Server Settings
Telnet Server Settings
Secure Shell Settings
IP Filter

User Account Commands

The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 36-1), user authentication via a remote authentication
server (page 41-3), and host access authentication for specific ports (page 43-1).
Command

username

enable password
username
This command adds named users, requires authentication at login, specifies or
changes a user's password (or specify that no password is required), or specifies or
changes a user's access level. Use the no form to remove a user name.
Syntax
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
• name - The name of the user.
(Maximum length: 8 characters, case sensitive. Maximum users: 16)
Table 41-1 Authentication Commands
Function
Configures the basic user names and passwords for management
access
Defines logon authentication method and precedence
Configures settings for authentication via a RADIUS server
Configures settings for authentication via a TACACS+ server
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Configures IP addresses that are allowed management access
Table 41-2 User Access Commands
Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
Page
41-1
41-3
41-5
41-9
41-11
41-14
41-15
41-24
Mode Page
GC 41-1
GC 41-2
41-1