Print And Wipe Menu - MUTOH Rockhopper II Series User Manual

5.4.68. Print and wipe menu

To take care of possible condensation on the head nozzle plate, it is possible to wipe while printing.
Parameters
Setup items
Print and Wipe OFF
High
Middle
Low
-
Notes :
•
•
•
•
•
1x6 64"
Head height
dir pass
low
dpi
360 bi
360 bi
360 bi
360 uni
360 uni
360 uni
720 bi
720 bi
720 uni
720 uni
•
The expectation is that for 50" units, the advised wiping intensity will be identical or more intense than for a 64"
printer.
*Prn + Wipe*
OFF – Low
F2 , F4
Only perform a wipe when there is condensation.
When there is condensation, and you use the wiping function, please refer to the
table mentioned below. → refer to "Technical Information Bulletin
TIB073_Rockhopper_II_Solvent_Condensation"
When installing the new firmware on your Rockhopper II printer, we advise you to
install the new wiper. Details will follow in a separate Technical Information
Bulletin.
When you want to do tests with the wiper, start at "Low", otherwise you'll have too
many wipes, and it is possible that the 'low' option is sufficient.
When the fixer (heater B) is not in use and nozzles are miss-firing or not firing, do
not use the wiping function to take care of this problem. In this case the miss-firing
cannot be caused by condensation. Perform a regular cleaning to solve this
problem.
2x4 64"
advised
Head
wipe
height low
setting
dpi
1 low 360
2 low 360
4 high 360
1 high 360
2 middle 360
4 middle 360
2 high 720
4 low 720
2 high 720
4 low 720
Rockhopper II series printers – User's Guide
+
OFF -
→ ENTER
Description
No wiping during printing
After printing 10 passes, wiping cycle will be
performed.
After printing 16 passes, wiping cycle will be
performed.
After printing 22 passes, wiping cycle will be
performed.
• [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to 'Setup menu'
advised
dir pass wipe
setting
bi 1 low
bi 2 low
bi 4 middle
uni 1 low
uni 2 low
uni 4 low
bi 2 low
bi 4 low
uni 2 middle
uni 4 low
110
1x6 87"
Head height
dir pass
low
dpi
360 bi 1
360 bi 2
360 bi 4
360 uni 1
360 uni 2
360 uni 4
720 bi 2
720 bi 4
720 uni 2
720 uni 4
AP-75095, Rev. 2.1, 18/08/2005
advised
wipe
setting
middle
middle
middle
middle
high
high
high
low
middle
Low