75DRV3/75DRV3+
2-5.1 JP1 Power Lost Resume
NOTE:
This jumper allows user to use the switch of ATX power supply to
control ON/OFF switch directly instead of using the power switch on the
mainboard.
2-5.2 JP11 On-board RAID Controller Select
Before installing disk array, you must first set JP11 enabled. (See chapter 5
for Disk Array Installation.)
JP1: Power Lost Resume
Disabled (default)
Enabled
JP11: On-Board RAID Controller Select
Enabled (default)
Disabled
28
JP1
1
3
JP1
1
3
JP11
1
3
JP11
1
3