SOLTEK SL-75DRV3/75DRV3+ User Manual page 114

75DRV3/75DRV3+
5-3.2-4 Installing Drivers With Existing Windows 95/98
The following three sections detail the installation of the FastTrak100-Lite
drivers on a system that has Windows 95/98 already installed. If you're
installing the FastTrak100-Lite drivers on a system during a Windows 95/
98 installation, see "Installing Drivers During Windows 95/98 Installation".
5-3.2-5 Windows 98
1. Connect your hard drive(s) for RAID Array to IDE3/IDE4, and enable
FastTrak100-Lite Controller with JP11. Configure the hard drive(s) for RAID
Array, power up the system and boot Windows.
2. The "Add New Hardware Wizard" will appear, informing you that it has
found a "PCI RAID Controller."
3. Check the "Search for the best driver for your device" box and click the
Next button.
4. Check the "Specify a Location" box and click the Next button.
5. Type "A:\WIN9x-ME" in the text box that appears.
6. Insert the "FastTrak100-Lite Driver" diskette in drive A:.
7. Click on "Next." The Add New Hardware wizard will say it has found
"Win95-98 Promise FastTrak100-Lite Controller".
8. Click on "Next," and then on "Finish."
9. Choose "Yes" when asked if you want to restart your computer. Be sure to
remove the diskette from drive A:.
5-3.2-6 Windows 95
1. Connect your hard drive(s) for RAID Array to IDE3/IDE4, and enable
FastTrak100-Lite Controller with JP11. Configure the hard drive(s) for RAID
Array, power up the system and boot Windows.
2. The "Update Device Drive Wizard" will appear, informing you that it has
found a "PCI Mass Storage Controller."
3. Insert the "FastTrak100-Lite Driver" diskette in drive A:.
4. Type "A:\WIN9x-ME" in the text box, then click on "Next." Windows will
inform you that it has found the "Win95/98 Promise FastTrak100-Lite
controller".
5. Click on "Finish," and when prompted to insert the "FastTrak100-Lite Driver"
diskette, click on "OK."
114