1-1.6 Full Featured Accelerated Graphics Ports (Agp) Controller; 1-1.7 Multi-I/O Function; 1-1.8 Expansion Slots; 1-1.9 Advanced High Performance Sdr/Ddr Dram Controller - SOLTEK SL-75DRV3/75DRV3+ User Manual

1-1.6 Full Featured Accelerated Graphics Ports (AGP) Controller

• AGP v2.0 compliant.
• Supports Side Band Addressing(SBA) mode (non-multiplexed address /
data).
• Supporting 66MHz 1x, 2x, and 4x modes for AD and SBA signaling.

1-1.7 Multi-I/O Function

• Two UltraDMA-33/66/100 Master Mode PCI EIDE ports.
• Two UARTs for complete Serial Ports.
• One dedicated IR connector:
--At third serial port dedicated to IR function either through the two complete serial
ports or the third dedicated port Infrared-IrDA (HPSIR) and ASK( Amplitude Shift
Keyed) IR.
• Multi-mode parallel connector supporting:
--Standard mode, ECP and EPP.
• Floppy Disk connector supporting:
--One FDD with drive swap function.
• Universal Serial Bus connector supporting:
-- USB v1.1 and Intel Universal HCI v1.1 compatible.
-- 2 built-in USB connectors, in addition to one internal USB header which requires
a USB cable to support 2 more optional USB ports.
• PS/2 keyboard connector.
• PS/2 Mouse connector.

1-1.8 Expansion Slots

• Six PCI bus Master slots.
• One CNR slot.
• One AGP 4x mode slot.
• Three 184-pin DIMM slots.
• One SCR (Smart Card Reader) slot.

1-1.9 Advanced High Performance SDR/DDR DRAM Controller

• Supporting memory size up to 3GB.
• Supporting 184-pin DDR SDRAM type only.
• Supporting PC1600 and PC2100 DDR SDRAM.

1-1.10 Form Factor

• ATX form factor, 4- layer PCB.
• Mainboard size 22.0cm x 30.5cm.
Chapter 1 Introduction
11