Table of Contents
Advertisement
75DRV3/75DRV3+
5-2.2 Navigating the FastBuild
When using the menus, there are some of the basic navigation tips:
Arrow keys highlights through choices; [ESC] key is used to abort or
exit the current menu.
5-2.3 Using the Main Menu
This is the first option screen when entering the FastBuild
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
Auto Setup ..............................................................[1]
View Drive Assignments .........................................[2]
View Array ...............................................................[3]
Delete Array ............................................................[4]
Rebuild Array ..........................................................[5]
Controller Configuration ..........................................[6]
To create a new array automatically, follow the setups under "Creating
Arrays Automatically" in Section 5-1. Promise recommends this option
for most users.
To view drives assigned to arrays, see "Viewing Drive Assignments" in
Section 5-2.5.
To delete an array (but not delete the data contained on the array), select
"Deleting An Array" in Section 5-2.12.
To rebuild a mirroring array, see "Rebuilding an Array" in Section 5-2.13.
To view controller settings, see "Viewing Controller Configuration" in
Section 5-2.14.
NOTE:
After configuring an array of new blank drive(s) using
FastBuild, you should FDISK and format the arrayed drive(s) , in a
way depending on the type of system you are using.
TM
[Main Menu]
[Keys Available]
Press 1...6 to Select Option [ESC] Exit
98
Setup Menu
TM
Setup.
Advertisement
Table of Contents
