2-5.1 Jp1 Power Lost Resume; 2-5.2 Jbat1 For Clear Cmos Data - SOLTEK SL-75ERV User Manual

75ERV

2-5.1 JP1 Power Lost Resume

NOTE:
This jumper allows user to use the switch of ATX power supply to
control ON/OFF switch directly instead of using the power switch on the
mainboard.

2-5.2 JBAT1 For Clear CMOS Data

A battery must be used to retain the mainboard configuration in CMOS
RAM.
NOTE:
You can clear CMOS by 2-3 pin closed when the system is POWER
OFF. Then, return to 1-2 pin closed position (default). You may damage
the mainboard if clearing the CMOS with POWER ON. Unplugging the
power cord from power supply before clearing CMOS will be a safest bet
for user.
JP1: Power Lost Resume
Disabled (default)
Enabled
JBAT1: Clear CMOS Data
Clear CMOS Data
Retain Data (Default)
26
JP1
1 3
JP1
1 3
JBAT1
1 3
JBAT1
1 3